Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


10-Gigabit Ethernet MIC with SFP+ (24 Ports)

Software release


  • Twenty-four 10-Gigabit Ethernet ports

  • Power requirement: 7.1 A @ 10.4 V (74 W)

  • Weight: 3.2 lb (1.45 kg)

  • Model number: MIC6-10G

  • Name in the CLI: 24x10GE SFPP

Hardware features

  • Supports 24 SFP+ pluggable optic ports

  • High-performance throughput on each port at speeds up to 10 Gbps

  • LAN-PHY mode at 10.3125 Gbps

  • WAN-PHY mode at 9.95328 Gbps

  • Supports LOS-squelch, enabling Synchronous Ethernet fast-clock-failover on a port down event

  • Maximum transmission units (MTUs) of up to 9192 bytes

Software features

  • Configurable LAN-PHY and WAN-PHY mode options per port

  • Compliant to ITU-T specifications

  • Optical diagnostics and related alarms

  • Virtual Router Redundancy Protocol (VRRP) support

  • IEEE 802.1Q virtual LANs (VLANs) support

  •  IEEE 802.1ad support

  • Remote monitoring (RMON) EtherStats

  • Source MAC learning

  • MAC accounting and policing—Dynamic local address learning of source MAC addresses

  • In-service software upgrade (Unified ISSU)

Cables and connectors


You can use the Hardware Compatibility Tool to find information about the pluggable transceivers supported on your Juniper Networks device.

The list of supported transceivers for the MX Series is located at;=All&pf;=MX+Series.


OK/FAIL LED, one bicolor:

  • Green—MIC is functioning normally.

  • Yellow—MIC is coming online.

  • Red—MIC has failed.

LINK LED, one bicolor per SFP+ port:

  • Off—No link.

  • Green—Link is up.

  • Yellow—Link is disabled.

The ports are labeled:

  • Port [0] to Port [23]