Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Reseat the Fan

CAUTION:

The fans on the ME-X1 are not field-replaceable components. If the fan on your device needs to be replaced, follow the Return Material Authorization (RMA) procedure.

Remove the Fan

Before you begin, remove the cover panel as described in Remove the Cover Panel.

To remove the fan:
  1. Remove the air shroud. Hold the air shroud at both ends and carefully lift it out of the system.
  2. Press the release tabs on the fan cable connector and disconnect the cable from the system board.
  3. Lift the fan out of the fan cage.

Install the Fan

To install the fan:
  1. Lower the fan into the cage until it is firmly seated.
  2. Route the fan cable properly so that it is not pinched or crimped.
  3. Press the release tabs on the cable connector and connect the cable to the system board.

After you have installed the fan:

  • Install the air shroud.

    Align the tabs on the air shroud with the slots on the system board and lower the air shroud until it is firmly seated.

  • Install the system cover as described in Install the Cover Panel.