Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Replacing AC Power Supply Cables on the JSA Appliance

To replace an AC power supply cord:

  1. Unplug the power cord from the power source receptacle.
  2. Attach an ESD grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis.
  3. Unplug the power cord from the appliance inlet on the power supply.
  4. Locate a replacement power cord with the type of plug appropriate for your geographical location.
  5. Insert the power cord plug into an external AC power source receptacle.
  6. Connect the power cord to the power supply.
  7. Verify that the power cord does not block the air exhaust and access to device components, or drape where people could trip on it.
  8. If the power supply is correctly installed and functioning normally, the supply automatically powers up.