Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Unpacking the JATP700

Overview of Unpacking the JATP700

To unpack the JATP700:

  1. Gather the tools required to unpack the JATP700.

  2. Remove the JATP700 appliance and all items from the shipping container. See, Unpacking the JATP700.

  3. Verify that all parts have been received. See, Unpacking the JATP700.

Unpacking the JATP700

Gather the tools required to unpack the JATP700 appliance:

  • Phillips (+) screwdriver, number 1

  • Phillips (+) screwdriver, number 3

Tip:

Save the shipping materials in case you need to move or ship the device later.

Note:

Do not unpack the device until you are ready to begin installation.

To unpack the JATP700:

  1. Move the cardboard carton to a staging area as close to the installation site as possible, where you have enough room to remove the components from the chassis.
  2. Position the cardboard carton with the arrows pointing up.
  3. Carefully open the top of the cardboard carton.
  4. Remove the foam covering the top of the JATP700 appliance.
  5. Remove the accessory box.
  6. Verify the parts received against the lists in Verifying the JATP700 Parts Received.

Verifying the JATP700 Parts Received

The JATP700 appliance shipment package contains a packing list. Check the parts in the shipment against the items on the packing list. The packing list specifies the part numbers and carries a brief description of each part in your order.

If any part on the packing list is missing or damaged, contact your customer service representative or contact Juniper customer care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or direct-dial options in countries without toll-free numbers, see https://www.juniper.net/support/requesting-support.html.

Table 1 lists the JATP700 parts received through shipment.

Table 1: Parts List for a JATP700 Appliance

Part

Quantity

JATP700 appliance

1

End User License Agreement

1

Product registration information

1

RoHS and Warranty Card

1

How to Set Up Your JATP700 Appliance

1

Ethernet cable, 7 feet

2

DB-9 to RJ-45 adapter

1

Rail kit

1 set

Screws bag

1

Front bezel

1

Related Documentation