Laser LED Safety Guidelines

Juniper Networks devices are equipped with laser transmitters, which are considered a Class 1 or Class 1M Laser Products by the U.S. Food and Drug Administration and are evaluated as a Class 1 Laser product per EN 60825-2 requirements.

Battery Handling Warning

Note:

Replacing a battery incorrectly might result in an explosion. Replace a battery only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions.

System Label Rating

54VDC, 4.82A max. _+12V DC, 6.67A max.

POE rating : 54V 1.85A

Inter building Connection Statement

For connections outside the building where the equipment is installed, the following ports must be connected through an approved network termination unit with integral circuit protection - 10/100/1000 Ethernet including Power-over-Ethernet ports .

Connection to the DC Supply Source

Connect only to DC power source that complies with the safety extra-low voltage (SELV) requirements in IEC 60950 based safety standards/ES1 requirements in IEC 62368 based on safety standards.