Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?


Cabling a CTP2000 T1/E1 Interface Module

To install a cable in an interface module:

  1. Ground yourself by using an antistatic wrist strap or other device, and connect it to an ESD grounding jack, if available, or another grounding device.
  2. Slide the cable as far as you can into the module until it clicks into place.
  3. Gently pull the cable to confirm that it is inserted correctly.
  4. Go on to Cabling the CTP Platform for DC Power.

For more information about T1/E1 interface module pinouts for the RJ-45 connector, refer T1/E1 Interface Module Pinouts.