Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

AP47 Components and Specifications

Figure 1: AP47 Components AP47 Components
Table 1: AP47 Components
Component Description
Reset A pinhole reset button that you can use to reset the AP configuration to the factory default.
USB USB 2.0 port
Eth0 + PoE 100/1000/2500/5000/10000 BASE-T RJ-45 port with MACsec that supports an 802.3bz PoE-powered device
Eth1 + PoE 100/1000/2500/5000/10000 BASE-T RJ-45 port that supports an 802.3bz PoE-powered device
Antenna connectors (available only in AP47E models) Three pluggable antenna connectors: 2.4/5/6 GHz (6 pin), 6 GHz + Scan (6 pin), and 5 GHz (4 pin)

Status LED

 A multicolor status LED to indicate the status of the AP and to help troubleshoot issues. See Troubleshoot a Juniper Access Point.

For AP47 specifications, see the AP47 Datasheet.