AP33 Components and Specifications
Figure 1 shows the components on the AP33.
Figure 1: AP33 Components
| Component | Description |
|---|---|
| Reset | A pinhole reset button that you can use to reset the AP configuration to the factory default. |
| USB | USB 2.0 port |
| Eth1 | 10/100/1000BASE-T RJ-45 port |
| Eth0 + PoE | 10/100/1000BASE-T RJ-45 port that supports an 802.3at PoE powered device |
| Kensington lock slot | Slot for a Kensington-style lock that you can use to secure the AP |
| Safety tie | Slot for a safety tie that you can use to either secure or hold the AP in place |
| Status LED | A multicolor status LED to indicate the status of the AP and to help troubleshoot issues. See Troubleshoot a Juniper Access Point. |
For AP33 specifications, see the AP33 Datasheet.