Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

AP32 Components and Specifications

Figure 1 shows the components on the AP32.

Figure 1: AP32 Components Back of a wireless access point showing a reset button, USB-C port, and two Ethernet ports labeled Eth1 and Eth0+PoE.
Table 1: AP32 Components
Component Description
Reset A pinhole reset button that you can use to reset the AP configuration to the factory default See Reset an AP to the Factory-Default Configuration.
USB USB 2.0 port
Eth1 10/100/1000BASE-T RJ-45 port
Eth0+PoE 10/100/1000BASE-T RJ-45 port that supports an 802.3at PoE-powered device
Antenna connectors (available only in AP32E models) Five reverse-polarity SubMiniature version A (RP-SMA) connectors
Kensington lock slot Slot for a Kensington-style lock that you can use to secure the AP
Safety tie Slot for a safety tie that you can use to either secure or hold the AP in place
Status LED A multicolor status LED to indicate the status of the AP and to help troubleshoot issues. See Troubleshoot a Juniper Access Point.

For AP32 specifications, see the AP32 Datasheet.