Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Mount an Access Point on a 3.5-Inch or 4-Inch Round Junction Box

Note:

This topic is applicable to the following access points (APs): AP21, AP24, AP27, AP32, AP33, AP34, AP36, AP37, AP41, AP43, AP45, AP47, and BT11.

You will need the APBR-U universal mounting bracket.

To mount an AP on a 3.5-inch or 4-inch round junction box:
  1. Attach the APBR-U mounting bracket to the junction box by using two screws. Ensure that you insert the screws in the holes marked 1 as shown in Figure 1.
    Figure 1: Attach the APBR-U Mounting Bracket to the Junction Box Attach the APBR-U Mounting Bracket to the Junction Box
  2. Extend the Ethernet cable through the bracket.
  3. Position the AP such that the shoulder screws on the AP engage with the keyholes of the mounting bracket. Slide and lock the AP in place.
    Figure 2: Mount the AP on the Junction Box Mount the AP on the Junction Box

This is a US 3 and 1/2 inch round and the BR-U attaches as shown here. And the AP would be installed normally. This is a US 4-inch round and the BR-U attaches as shown here. And the AP would be installed normally.