Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Mount an Access Point on a 1/2-Inch Threaded Rod

Note:

This topic is applicable to the following access points (APs): AP21, AP24, AP27, AP32, AP33, AP34, AP36, AP37, AP41, AP43, AP45, AP47, and BT11

You will need the APBR-U mounting bracket and the APBR-ADP-T12 adapter.

To mount an access AP on a 1/2-in. threaded rod:
  1. Attach the APBR-ADP-T12 bracket adapter to the APBR-U mounting bracket. Rotate the bracket until you hear a distinct click, which indicates that the bracket is locked in place.
    Figure 1: Attach the APBR-ADP-T12 Bracket Adapter to the APBR-U Mounting Bracket Attach the APBR-ADP-T12 Bracket Adapter to the APBR-U Mounting Bracket
  2. Secure the adapter to the bracket using a screw.
    Figure 2: Secure the APBR-ADP-T12 Bracket Adapter to the APBR-U Mounting Bracket Secure the APBR-ADP-T12 Bracket Adapter to the APBR-U Mounting Bracket
  3. Attach the bracket assembly (bracket and adapter) to the ½-in. threaded rod by using the lock washer and nut provided
    Figure 3: Attach the APBR-ADP-T12 and APBR-U Bracket Assembly to the ½-Inch Threaded Rod Attach the APBR-ADP-T12 and APBR-U Bracket Assembly to the ½-Inch Threaded Rod
  4. Position the AP such that the shoulder screws on the AP engage with the keyholes of the mounting bracket. Slide and lock the AP in place.
    Figure 4: Mount the AP on a 1/2-in. Threaded Rod Mount the AP on a 1/2-in. Threaded Rod