HPE Aruba Central LEDs

The system status LED indicates the system status of the access point.

NOTE
HPE Mist System Status LED details: HPE Mist AP Blink Patterns
Table 1. System Status LEDs for HPE Aruba Networking Access Points

LED

Color/State

Meaning

Off

AP Powered off

Green- blinking1

AP booting, not ready

Green- solid

AP ready, fully functional, no network restrictions

Green- flashing off2

AP ready, fully functional, uplink negotiated in sub-optimal speed (< 1 Gbps)

Green- flashing on3

AP in deep-sleep mode

Amber- solid

AP ready, restricted power mode (limited PoE power available, or IPM restrictions applied), no network restrictions

Amber- flashing off2

AP ready, restricted power mode (limited PoE power available, or IPM restrictions applied), uplink negotiated in sub-optimal speed (< 1 Gbps)

Red

System error condition - Immediate attention required

  1. Blinking: one second on, one second off, 2 seconds cycle.

  2. Flashing off: mostly on, fraction of a second off, 2 seconds cycle.

  3. Flashing on: mostly off, fraction of a second on, 2 seconds cycle.