ACX7348 Chassis

Fixed FPC

The ACX7348 router has a fixed flexible PIC concentrator (FPC) that has 48 small form-factor pluggable 28 (SFP28) ports with MACsec capabilities and 8 quad small form-factor pluggable 28 (QSFP28) ports. Table 1 shows the port speeds that the fixed FPC supports.

Table 1: Ethernet Port Rates on the Fixed FPC

Native Port Speed	Port Number	Total number of ports
1GbE	0–23 and 32–55	48
10GbE	0–23 and 32–55	48
25GbE	0–23 and 32–55	48
40GbE	24–31 Note: Each 40GbE port supports 4x10GbE breakout option.	8
100GbE	24–31 Note: Each 100GbE port supports 4x25GbE breakout option.	8

One bicolor LED below the device label (ACX7348) indicates the status of the router.

Table 2: System LED on the Front Panel

Color	State	Description
Green	Blinking	System has no primary Routing Engine.
	On steadily	The system is functioning normally.
Red	Blinking	One or more fans are not installed in the router before the software is up and running.
	On steadily	The fixed FPC has a power-related fault.

Timing Ports

Figure 4 lists the components on the ACX7348 router's timing ports.

Here's a definition of the ports and labels on the timing ports. See Table 3 for a description of the timing ports LED indicators.

• GNSS antenna port—Connects to a GNSS antenna.

• BITS—Building-integrated timing supply (BITS) external clocking interface for connecting to external clocking devices.

• 10MHz (I/O)—10-MHz input and output clocking port for connecting to external clock signal sources. The clocking port synchronizes clock inputs based on the clock’s priority.

• PPS—1-pulse per second (PPS) output connector for connecting to external clock signal sources. The clocking port synchronizes clock inputs based on the clock’s priority.

Table 3: Timing Ports LEDs on the ACX7348 Chassis

LED	Color	State	Description
GNSS	Unlit	Off	GNSS signal is not locked.
	Green	On steadily	GNSS signal is locked.
BITS	Green	On steadily	Clock is active.
	Yellow	On steadily	Loss of clock.