Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Unpacking the ACX500

Unpacking the ACX500 Router

The ACX500 routers are shipped in a cardboard carton, secured with foam packing material. The carton also contains an accessory box.

CAUTION:

ACX500 routers are maximally protected inside the shipping carton. Do not unpack the routers until you are ready to begin installation.

To unpack the router and prepare for installation, you need the following tools:

  • Blank panels to cover any slots not occupied by a component

To unpack the router:

  1. Move the shipping carton to a staging area as close to the installation site as possible, but where you have enough room to remove the system components.
  2. Position the carton so that the arrows are pointing up.
  3. Open the top flaps on the shipping carton.
  4. Remove the accessory box, and verify the contents in it against the parts inventory on the label attached to the carton.
  5. Pull out the packing material holding the router in place.
  6. Verify the chassis components received against the packing list included with the router. An inventory of parts provided with the router is provided in Parts Inventory (Packing List) for ACX500 Routers.
  7. Save the shipping carton and packing materials in case you need to move or ship the router later.

Parts Inventory (Packing List) for ACX500 Routers

The ACX500 routers are shipped in a cardboard carton, secured with foam packing material. The carton also contains an accessory box.

The router shipment includes a packing list. Check the parts you receive in the router shipping carton against the items on the packing list. The packing list specifies the part number and description of each part in your order. The parts shipped depend on the configuration you order.

If any part on the packing list is missing, contact your customer service representative or contact Juniper Customer Care from within the U.S. or Canada by telephone at 1-888-314-5822. For international-dial or direct-dial options in countries without toll-free numbers, see https://www.juniper.net/support/requesting-support.html.

Table 1 and Table 2 list the parts and their quantities in the packing list.

Note:

You must provide additional mounting screws if needed that are appropriate for your rack or cabinet to mount the ACX500 indoor chassis on a rack or a cabinet.

Table 1: Parts List for an ACX500 Indoor Router

Component

Quantity

Router with built-in power supply

1

Mounting brackets

2

Mounting screws to attach the mounting brackets to the router chassis

8

SFP dust cover

6

RJ-45 cable and RJ-45 to DB-9 serial port adapter

1

Quick Start installation instructions

1

Juniper Networks Product Warranty

1

End User License Agreement

1

Table 2: Parts List for an ACX500 Outdoor Router

Component

Quantity

Router with built-in power supply

1

SFP dust cover

6

RJ-45 cable and RJ-45 to DB-9 serial port adapter

1

Quick Start installation instructions

1

Juniper Networks Product Warranty

1

End User License Agreement

1

Note:

The AC power cord or the DC power cord for the ACX500 outdoor routers is not shipped with the router. You need to purchase it separately.

Use the power cord that is purchased from Juniper Networks, and that is compatible with the ACX500 outdoor routers. Using a power cord other than that is provided by Juniper Networks with the router can damage the power terminal.

Table 3 and Table 4 list the parts and their quantities in the wall-mounting and pole-mounting kits required for installing the outdoor router.

Note:

The wall-mounting and the pole-mounting kits are not provided with the router. You need to purchase the mounting kits separately.

Table 3: Parts List for the Wall-Mounting Kit

Component

Quantity

Wall-mounting bracket

1

Chassis-mounting bracket

1

Nuts

4

Screws

10

Washers

14

Table 4: Parts List for the Pole-Mounting Kit

Component

Quantity

Pole-mounting bracket

1

Chassis-mounting bracket

1

Nuts

4

Screws

10

Washers

14

Pole-mounting strap and screw

3