Technical Documentation

Stopping and Starting JUNOS Software

This checklist provides the links to tasks for stopping and starting the JUNOS software after it has been installed, and a summary of the commands used in those tasks. (See Table 1.)

Table 1: Checklist for Stopping and Starting the JUNOS Software

Tasks

Command or Action

  1. Stop the JUNOS Software

request system halt

  1. Reboot the JUNOS Software

request system reboot

Restart a JUNOS Software Process
  1. Display Information About Software Processes

show system processes extensive

  1. Restart a JUNOS Software Process

restart (class-of-service | interface-control | mib-process | network-access-service | remote-operations | routing | sampling | snmp) <gracefully> <immediately> <soft>

  1. Check That the Process Has Restarted

show system processes extensive


Published: 2010-01-25