Technical Documentation

System View

System Information

To view information about system properties such as the name and IP address of the routing platform or the resource usage on the Routing Engine, select Monitor>System View in the J-Web interface.

Table 1 shows a summary of the information displayed on System pages and the corresponding CLI show commands you can enter at the J-Web CLI terminal.

Table 1: System Information and Corresponding CLI show Commands

Information Displayed

Corresponding CLI Command

Current time and information about how long the routing platform, routing platform software, and routing protocols have been running.

show system uptime

Information about users who are currently logged in to the routing platform.

show system users

Statistics about the amount of free disk space in the routing platform’s file systems.

show system storage

Software processes running on the routing platform.

show system processes

Chassis Information

To view chassis properties on the routing platform, select Monitor>System View>Chassis Information in the J-Web interface.

Table 2 shows a summary of the information displayed on the Chassis Information page and the corresponding CLI show commands you can enter at the J-Web CLI terminal.

Table 2: Chassis Information and Corresponding CLI show Commands

Information Displayed

Corresponding CLI Command

Conditions that have been configured to trigger alarms.

show chassis alarms

Environmental information about the routing platform chassis, including the temperature and information about the fans, power supplies, and Routing Engine.

show chassis environment

Status information about the installed FPCs and PICs.

show chassis fpc

List of all FPCs and PICs installed in the routing platform chassis, including the hardware version level and serial number.

show chassis hardware

Process Details

To view process details like process ID, CPU load, or memory utilization, select Monitor>System View>Process Details in the J-Web interface.

Table 3 shows a summary of the information displayed on the Process Details page and the corresponding CLI show commands you can enter at the J-Web CLI terminal.

Table 3: Process Details Information and Corresponding CLI show Commands

Information Displayed

Corresponding CLI Command

Software processes running on the router

show processes extensive

FEB Redundancy (M120 Routing Platforms Only)

On M120 routers, Forwarding Engine Boards (FEBs) provide route lookup and forwarding functions from Flexible PIC Concentrators (FPCs) and compact Flexible PIC Concentrators (cFPCs). You can configure FEB redundancy groups to provide high availability for FEBs.

To view the status of FEBs and FEB redundancy groups, or connectivity between FPCs and FEBs, select Monitor>System View>FEB Redundancy in the J-Web interface.

Table 4 shows a summary of the information displayed on the FEB Redundancy page and the corresponding CLI show command you can enter at the J-Web CLI terminal.

Table 4: FEB Redundancy Information and Corresponding CLI show Command

Information Displayed

Corresponding CLI Command

Forwarding Engine Board (FEB) status information.

show chassis feb


Published: 2010-04-29