Technical Documentation

PPPoE (J Series Routing Platforms Only)

The PPPoE monitoring information is displayed in multiple parts. To display the session status for PPPoE interfaces, cumulative statistics for all PPPoE interfaces on the routing platform, and the PPPoE version configured on the routing platform, select Monitor>PPPoE in the J-Web interface.

To view interface-specific properties in the J-Web interface, select the interface name on the PPPoE page.

Table 1 shows a summary of the information displayed on the PPPoE page and the corresponding CLI show commands you can enter at the J-Web CLI terminal.

Table 1: PPPoE Information and Corresponding CLI show Commands

Information Displayed

Corresponding CLI Command

Session-specific information about the interfaces on which PPPoE is enabled.

show pppoe interfaces

Statistics for PPPoE sessions currently active.

show pppoe statistics

PPPoE protocol currently configured on the routing platform.

show pppoe version


Published: 2010-04-29