Technical Documentation

Configuring the VLAN Ethernet Packet Type for Stacked VLAN Dynamic Profiles

To configure the VLAN Ethernet packet type the stacked VLAN dynamic profile can accept:

  1. Access the interface over which you want to create dynamic VLANs.
    user@host# edit interfaces ge-0/0/0
  2. Edit the VLAN auto-configure stanza.
    [edit interfaces ge-0/0/0]user@host# edit auto-configure
  3. Edit the stacked-vlan-ranges stanza.
    [edit interfaces ge-0/0/0 auto-configure]user@host# edit stacked-vlan-ranges
  4. Access the VLAN dynamic profile for which you want to configure VLAN ranges.
    [edit interfaces ge-0/0/0 auto-configure stacked-vlan-ranges]user@host# edit dynamic-profile STACKED-VLAN-PROF1
  5. Specify what VLAN Ethernet packet type the stacked VLAN dynamic profile accepts.

    Note: This release supports inet and dhcp-v4 Ethernet packet types for IPv4 packets and inet6 and dhcp-v6 Ethernet packet types for IPv6 packets.

    [edit interfaces ge-0/0/0 auto-configure stacked-vlan-ranges]user@host# set accept inet

Published: 2010-04-15