[an error occurred while processing this directive][an error occurred while processing this directive]

Managing System Processes in the Routing Matrix with a TX Matrix Router

Some system processes in a routing matrix with a TX Matrix router run on the TX Matrix router and some run on the T640 routers. For example, the routing protocol process (rpd) runs exclusively on the TX Matrix router. To restart the routing protocol process for the entire routing matrix, issue the restart routing command on the TX Matrix router.


user@router> restart routing ?
Possible completions:
  <[Enter]>            Execute this command
  gracefully           Gracefully restart the process
  immediately          Immediately restart (SIGKILL) the process
  logical-system       Name of logical system
  soft                 Soft reset (SIGHUP) the process
  |                    Pipe through a command

Other processes run on both the TX Matrix router and the T640 routers. To restart the chassis process that manages PICs, FPCs, and other hardware components, issue the restart chassis-control command on the TX Matrix router and select the all, all-lcc, or lcc lcc-number option.


user@router> restart chassis-control ?
Possible completions:
  <[Enter]>            Execute this command
   all                  Restart software process on all chassis
all-lcc Restart software process on all LCC chassis
gracefully Gracefully restart the process immediately Immediately restart (SIGKILL) the process lcc Restart software process on specific chassis (0..3) soft Soft reset (SIGHUP) the process | Pipe through a command

To restart the Simple Network Management Protocol (SNMP) process, issue the restart snmp command on the TX Matrix router and select the all, all-lcc, or lcc lcc-number option.


user@router> restart snmp ?
Possible completions:
  <[Enter]>            Execute this command
   all                  Restart software process on all chassis
  all-lcc              Restart software process on all LCC chassis
  gracefully           Gracefully restart the process
  immediately          Immediately restart (SIGKILL) the process
  lcc                  Restart software process on specific chassis (0..3)
  soft                 Soft reset (SIGHUP) the process
  |                    Pipe through a command

Published: 2010-04-15

[an error occurred while processing this directive]