Technical Documentation

Configuring ARP Functionality for Extended VLAN Circuits

For extended VLAN circuits, include the encapsulation extended-vlan-tcc statement. This statement configures the encapsulation for the entire physical interface.

You must also enable VLAN tagging. Ethernet interfaces in VLAN mode can have multiple logical interfaces. For encapsulation type extended-vlan-tcc, all VLAN IDs from 0 through 4094 are valid, up to a maximum of 1024 VLANs.

To enable ARP functionality, configure the remote statement at the [edit interfaces interface-name unit unit-number family tcc] hierarchy level with either the MAC address or IP address of your Ethernet TCC neighbor. To complete the ARP setup, configure the proxy statement at the [edit interfaces interface-name unit unit-number family tcc] hierarchy level and specify the IP address of the non-Ethernet TCC neighbor.

[edit]interfaces {EthernetType-fpc/pic/port {vlan-tagging;encapsulation extended-vlan-tcc;unit 0 {vlan-id 600;family tcc {remote { # Addresses associated with the Ethernet TCC neighbor.mac-address mac-address; # Select a MAC or IP address.inet-address inet-address;}proxy { # Addresses belonging to the non-Ethernet TCC neighbor.inet-address inet-address;}}}}}

Published: 2010-04-15