[an error occurred while processing this directive][an error occurred while processing this directive]

Set Clocking to Internal

Purpose

You set clocking to internal because there is no external clock source in a loopback connection.

Action

To configure clocking to internal, follow these steps:

  1. In configuration mode, go to the following hierarchy level:
    [edit] user@host# edit interfaces interface-name
  2. Configure clocking to internal:
    [edit interfaces interface-name] user@host# set clocking internal
  3. Verify the configuration:
    user@host# show

    For example:

    [edit interfaces t3-1/0/0]user@host# show clocking internal;
  4. Commit the change:
    user@host# commit

    For example:

    [edit interfaces t3-1/0/0]user@host# commit commit complete

Meaning

The clock source for the interface is set to the internal Stratum 3 clock.


Published: 2010-01-29

[an error occurred while processing this directive]