[an error occurred while processing this directive][an error occurred while processing this directive]

Dynamically Attaching Statically Created Filters for Any Interface Type

You can dynamically attach statically created filters for any interface type. These filters apply to any interfaces that are created using the dynamic profile.

Before you can attach a statically created filter using a dynamic profile.

  1. Create the filters you want to attach.

    See the JUNOS Policy Framework Configuration Guide for detailed information about classic firewall filters and how to create them. See Configuring Fast Update Filters for information about creating fast update filters.

  2. Create a basic dynamic profile.

    See Configuring a Basic Dynamic Profile.

To dynamically attach statically created input and output filters for all interfaces created dynamically using the dynamic profile:

  1. Access the dynamic profile, interface, and unit that you want to use when applying the static filters.
    [edit]user@host# edit dynamic-profiles access-profile interfaces ge-1/1/1 unit 1
  2. Specify the input filter for the interface unit.
    [edit dynamic-profiles access-profile interfaces ge-1/1/1 unit 1]user@host# set filter input static-input-filter
  3. Specify the output filter for the interface unit.
    [edit dynamic-profiles access-profile interfaces ge-1/1/1 unit 1] user@host# set filter output static-output-filter

Published: 2010-04-15

[an error occurred while processing this directive]