[an error occurred while processing this directive][an error occurred while processing this directive]

Configuring Static Customer VLANs for the PPPoE Layer 3 Wholesale Network Solution

In this example configuration, the access interface (ge-9/3/0) connects to a device (that is, a DSLAM) on the access side of the network. You can define static customer VLANs (C-VLANs) for use by the wholesaler and any access network subscribers.

To configure the customer VLANs:

  1. Edit the access side interface.
    [edit]user@host# edit interfaces ge-9/3/0
  2. Specify the use of flexible VLAN tagging.
    [edit interfaces ge-9/3/0]user@host# set flexible-vlan-tagging
  3. Edit the interface unit for the wholesaler VLAN.
    [edit interfaces ge-9/3/0]user@host# edit unit 14
  4. Specify the type of encapsulation that you want the wholesaler VLAN to use.
    [edit interfaces ge-9/3/0 unit 14]user@host# set encapsulation ppp-over-ether
  5. (Optional) Specify that you want the wholesaler VLAN to use Proxy ARP.
    [edit interfaces ge-9/3/0 unit 14]user@host# set proxy-arp
  6. Define a unique VLAN ID for the wholesaler VLAN.
    [edit interfaces ge-9/3/0 unit 14]user@host# set vlan-id 14
  7. Specify the dynamic profile that you want the wholesaler VLAN to use.
    [edit interfaces ge-9/3/0 unit 14]user@host# set pppoe-underlying-options dynamic-profile PPPoE_Wholesaler_Profile

Published: 2010-04-14

[an error occurred while processing this directive]