[an error occurred while processing this directive][an error occurred while processing this directive]

Configuring Predefined Dynamic Variables in Dynamic Profiles

This topic discusses how to configure predefined variables in a dynamic profile. The dynamic profile obtains and replaces data for these variables from an incoming client data packet. You can specify these variables in the body of a dynamic profile without having to first define the variables at the [edit dynamic-profiles profile-name variables] hierarchy level.

Before you configure dynamic variables:

  1. Create a basic dynamic profile.

    See Configuring a Basic Dynamic Profile.

  2. Ensure that the router hardware is configured in the network to accept subscriber access.

To configure predefined variables in a dynamic profile:

  1. Access the desired dynamic profile.
    [edit]user@host# edit dynamic-profiles igmpProfile1 [edit dynamic-profiles igmpProfile1]
  2. Configure the necessary variables.
    [edit dynamic-profiles igmpProfile1]user@host# set protocols igmp interface $junos-interface-name

    For a complete list of supported predefined variables, see JUNOS Predefined Variables.


Published: 2010-04-15

[an error occurred while processing this directive]