[an error occurred while processing this directive][an error occurred while processing this directive]

Configuring the PTSP Partition

PTSP works within a specific logical system:routing instance context, called a partition. The partition is configured to connect to the external policy manager.

Note: Currently, only a single partition is supported; you must configure it within the default logical system:routing instance context.

Before you configure the PTSP partition to connect to the external policy manager, perform the following task:

  • Configure the Diameter instance for the remote SRC peer at the [edit diameter] hierarchy level. See Configuring Diameter.

Configuration for the PTSP partition consists of naming the partition and then associating a Diameter instance, the SAE hostname, and the SAE realm with the partition.

To configure the PTSP partition:

  1. Create the partition at the [edit system services packet-triggered-subscribers] hierarchy level.
    [edit system services packet-triggered-subscribers]user@host# edit partition ptsp–default
  2. Specify the Diameter instance for the PTSP partition.
    [edit system services packet-triggered-subscribers partition ptsp–default]user@host# set diameter-instance master
  3. Configure the destination host for the PTSP partition.
    [edit system services packet-triggered-subscribers partition ptsp–default]user@host# set destination-host sae1
  4. Configure the destination realm for the PTSP partition.
    [edit system services packet-triggered-subscribers partition ptsp–default]user@host# set destination-realm generic.example.com

Published: 2010-04-15

[an error occurred while processing this directive]