Technical Documentation

Configuring the Routing Engine (Blade) Name

JCS configuration should include a name for each Routing Engine (blade) included with the JCS1200 platform. This name is used to identify each Routing Engine in CLI command output and so on.

To configure the blade name information:

  1. Log in to the JCS management module.
  2. Use the env command to specify the blade you want to configure. For example:

    system> env -T blade[1]
  3. Use the config command to configure the blade name. For example:

    system:blade[1]> config -name BLADE01

    In this example, the blade name is BLADE01. This name identifies the JCS Routing Engine on the network, and it appears in monitoring command output.


Published: 2010-04-12