[an error occurred while processing this directive][an error occurred while processing this directive]

Configuring Filter-Based Forwarding

Configure a firewall filter that forces a lookup against the different routing tables. Any routes that match the specified forwarding class specified and then match a specified topology are installed in the routing table for that topology. To configure a firewall filter for MTR that performs filter-based forwarding, include the following configuration at the [edit firewall] hierarchy level:

[edit firewall]family inet { # inet6 is also supported.filter topology-selection {term ef {from {forwarding-class expedited-forwarding; # The following class types are also
# supported: assured-forwarding, best-effort, and network-control.
}
then {topology voice; # Specify the name of a configured topology.accept;}}
}
}

You must apply the filter to an ingress interface. Include the following statements at the [edit interfaces] hierarchy level to apply the filter to an interface:

[edit interfaces]fe-2/2/1 {unit 0 {family inet {filter {input topology-selection; # Specify the name of the filter configured under
# the [edit firewall] hierarchy.
}
}
}
}

Published: 2010-04-15

[an error occurred while processing this directive]