[an error occurred while processing this directive][an error occurred while processing this directive]

Configure Encapsulation to Cisco-HDLC

Action

To set the encapsulation on a T1 physical interface, follow these steps:

  1. In configuration mode, go to the following hierarchy level:
    [edit]user@host# edit interfaces interface-name
  2. Configure Cisco-HDLC:
    [edit interfaces interface-name ]user@host# set encapsulation cisco-hdlc
  3. Verify the configuration:
    user@host# show

    For example:

    [edit interfaces t1-0/1/1:8]user@host# show encapsulation hdlc;
  4. Commit the change:
    user@host# commit

    For example:

    [edit interfaces t1-0/1/1:8]user@host# commit commit complete

Meaning

This command sets the interface encapsulation to the Cisco High-Level Data-Link Control (HDLC) transport protocol.


Published: 2010-01-29

[an error occurred while processing this directive]