[an error occurred while processing this directive][an error occurred while processing this directive]

Configuring the MPLS Family on Core Interfaces

Because LDP is used as the signaling protocol to transport MPLS labels across the core of the network, you must include the family mpls statement at the [edit interfaces interface-name unit logical-unit-number] hierarchy level. Include the statement on all router interfaces in the path from the local PE router to the remote PE router across the core network that transports the Layer 2 circuit traffic.

[edit]interfaces {interface-name {unit logical-unit-number {family inet {address ip-address/prefix;}family mpls;}}}

Published: 2010-04-15

[an error occurred while processing this directive]