[an error occurred while processing this directive][an error occurred while processing this directive]

Configuring a Virtual BGF

To configure a virtual BGF:

  1. Create a virtual BGF, and assign a name to it. You can configure an IP address as the virtual BGF name. However, the IP address is not used in the operation of the virtual BGF.
    [edit services pgcp]user@host# edit gateway bgf-1
  2. Specify the IP address of the virtual BGF. This is the address of the services PIC or DPC that you configured for the BGF.
    [edit services pgcp gateway bgf-1]user@host# set gateway-address 10.10.200.21
  3. Specify the port number of the virtual BGF.
    [edit services pgcp gateway bgf-1]user@host# set gateway-port 2944
  4. Specify the services PIC or DPC on which the BGF process runs.
    [edit services pgcp gateway bgf-1]user@host# set platform device ms-0/3/0
  5. Set the virtual BGF to in-service.
    [edit services pgcp gateway bgf-1]user@host# set service-state in-service

Published: 2010-04-22

[an error occurred while processing this directive]