Technical Documentation

Configuring a Service Point

To configure a service point:

  1. Create a service point, and assign it a name.
    [edit services border-signaling-gateway gateway bsg-1]user@host# edit service-point sip-udp-5060
  2. Assign a service interface to the service point. This is the logical interface that you configured for the BSG.
    [edit services border-signaling-gateway gateway bsg-1 service-point sip-udp-5060]user@host# set service-interface ms-0/3/0.0
  3. Assign transport parameters, which can include any combination of port number, IP address, and transport protocol. Policies are applied only to incoming requests that match the transport parameters. Make sure that the IP address is the address of the service interface that you configured for the BSG.
    [edit services border-signaling-gateway gateway bsg-1 service-point sip-udp-5060]user@host# set transport-details port 5060 ip-address 10.10.200.20 udp
  4. Assign a VoIP protocol as the service point type. Currently, SIP is the only protocol supported.
    [edit services border-signaling-gateway gateway bsg-1 service-point sip-udp-5060]user@host# set service-point-type sip
  5. Attach new transaction input and output service policies or policy sets to the service point. New transaction input policies apply to transactions entering at the service point, while new transaction output policies apply to transactions exiting from the service point.
    [edit services border-signaling-gateway gateway bsg-1 service-point sip-udp-5060]user@host# set service-policies new-transaction-input-policies peer-to-core [edit services border-signaling-gateway gateway bsg-1 service-point sip-udp-5060]user@host# set service-policiesnew-transaction-output-policies core-to-peer
  6. Attach new call usage input and policies or policy sets to the service point. New call usage input policies apply to calls entering at the service point, while new call usage output policies apply to new calls exiting from the service point.
    [edit services border-signaling-gateway gateway bsg-1 service-point sip-udp-5060]user@host# set service-policies new-call-usage-input-policies peer-media-2-core user@host# set service-policiesnew-call-usage-output-policies core-media-2-peer

Published: 2010-04-13