Technical Documentation

Configuring a Gateway Controller

To configure a gateway controller:

  1. Create a gateway controller configuration, and assign a name to the gateway controller.
    [edit services pgcp gateway bgf-1]user@host# edit gateway-controller bsg-1
  2. Specify the BSG to control the virtual BGF.
    [edit services pgcp gateway bgf-1 gateway-controller bsg-1]user@host# set local-controller bsg-1
  3. Specify the IP address of the gateway controller. This is the address of the services PIC or DPC that you configured for the BSG.
    [edit services pgcp gateway bgf-1 gateway-controller bsg-1]user@host# set controller-address 10.10.200.20
  4. Configure the number of the gateway controller listening port.
    [edit services pgcp gateway bgf-1 gateway-controller bsg-1]user@host# set controller-port 2944

Published: 2010-04-22