[an error occurred while processing this directive][an error occurred while processing this directive]

Establishing GMPLS LSP Path Information

When you configure LSP paths for GMPLS, you must use the traffic engineering link remote address as your next-hop address. When CSPF is supported, you can use any path option you wish. However, when CSPF is disabled with the no-cspf statement at the [edit protocols mpls label-switched-path lsp-name] hierarchy level, you must use strict paths.

[edit] protocols {mpls {path path-name { next-hop-address (strict | loose); }}}

Published: 2010-04-15

[an error occurred while processing this directive]