[an error occurred while processing this directive][an error occurred while processing this directive]

Specifying a Firewall Filter to Select Traffic to Monitor

When you define a firewall filter, you select the initial traffic to be monitored. To configure a firewall filter, include the filter statement at the [edit firewall family inet] hierarchy level. All filtered traffic to be monitored must be accepted.

[edit]firewall {family inet {filter input-monitoring-filter {term 1 {from {destination-address {10.7.0.0/16;}}then {count counter1;accept;}}term 2 {from {destination-address {10.6.0.0/16; }}then {count counter2;accept;}}}}}

Published: 2010-04-15

[an error occurred while processing this directive]