[an error occurred while processing this directive][an error occurred while processing this directive]

Configuring Hierarchical CoS on a Static PPPoE Subscriber Interface

You can configure hierarchical CoS on a static PPPoE subscriber interface.

Before you begin:

To configure hierarchical CoS on a static PPPoE subscriber interface:

  1. Specify the PPPoE interface that you want to configure.
    user@host# edit interfaces pppoe-interface-name
  2. Configure the hierarchical scheduler for the interface.
    [edit interfaces interface-name]user@host# set hierarchical-scheduler
  3. (Optional) Group the PPPoE interfaces in an interface set.
    [edit]user@host# edit interfaces interface-set interface-set-name

You can now configure static traffic and scheduling parameters for each traffic-control profile, and attach each traffic-control profile to the PPPoE interface or the PPPoE interface set. For more information, see the JUNOS Class of Service Configuration Guide.


Published: 2010-04-15

[an error occurred while processing this directive]