Technical Documentation

Configuring the JUNOS Software to Support ILMI for Cell Relay Encapsulation on an ATM2 IQ PIC

Integrated Local Management Interface (ILMI) is supported on AAL5 interfaces, regardless of transport mode. To enable ILMI on interfaces with cell-relay encapsulation, you must configure an ATM2 IQ PIC to use Layer 2 circuit trunk transport mode.

To configure ILMI on an interface with cell-relay encapsulation, include the following statements:

[edit chassis fpc slot-number pic pic-number]atm-l2circuit-mode trunk trunk;[edit interfaces at-fpc/pic/port]encapsulation atm-ccc-cell-relay;atm-options {ilmi;pic-type atm2;}unit logical-unit-number {trunk-id number;}

For an example on how to enable ILMI for cell relay, see the JUNOS Network Interfaces Configuration Guide.


Published: 2010-04-26