Technical Documentation

Configuring the Method and Reason in Service Change Commands

This topic describes how to configure the method and reason in service change commands and consists of the following tasks:

Configuring the Method and Reason in ServiceChange Commands for Control Associations

To configure the method and reason in ServiceChange commands for control associations:

  1. Access the configuration of the service change control association indications properties.
    [edit services pgcp]user@host# edit gateway bgf-1 h248-options service-change control-association-indications
  2. Specify the method and reason that the virtual BGF includes in Registration Request ServiceChange commands when it attempts to reregister with the gateway controller or register with a new gateway controller after the control association is disconnected.
    [edit services pgcp gateway bgf-1 h248-options service-change control-association-indications]user@host# set disconnect controller-failure restart-902
  3. Specify the method and reason that the virtual BGF includes in Registration Request ServiceChange commands when it attempts to reregister with the gateway controller or register with a new gateway controller after the control association is disconnected.
    [edit services pgcp gateway bgf-1 h248-options service-change control-association-indications]user@host# set disconnect reconnect restart-902
  4. Specify the method and reason that the virtual BGF includes in Unregistration Messages in ServiceChange commands that it sends to the gateway controller when a control association transitions to Out-of-Service because of an administrative operation.
    [edit services pgcp gateway bgf-1 h248-options service-change control-association-indications]user@host# set down administrative forced-908
  5. Specify the method and reason that the virtual BGF includes in Unregistration Messages in ServiceChange commands that it sends to the gateway controller when a control association transitions to Out-of-Service because of a failure.
    [edit services pgcp gateway bgf-1 h248-options service-change control-association-indications]user@host# set down failure forced-904
  6. Specify the method and reason that the virtual BGF includes in Notification ServiceChange commands that it sends to the gateway controller when the control association transitions from In-Service to Out-of-Service-Graceful.
    [edit services pgcp gateway bgf-1 h248-options service-change control-association-indications]user@host# set down graceful graceful-905
  7. Specify the method and reason that the virtual BGF includes in Notification ServiceChange commands that it sends to the gateway controller when the control association has returned to the Connected state.
    [edit services pgcp gateway bgf-1 h248-options service-change control-association-indications]user@host# set up cancel-graceful restart-918
  8. Specify the method and reason that the virtual BGF includes in Registration ServiceChange commands when it attempts to register with a new gateway controller following a cold failover.
    [edit services pgcp gateway bgf-1 h248-options service-change control-association-indications]user@host# set up failover-cold failover-920
  9. Specify the method and reason that the virtual BGF includes in Registration ServiceChange commands when it attempts to register with a new gateway controller following a warm failover.
    [edit services pgcp gateway bgf-1 h248-options service-change control-association-indications]user@host# set up failover-warm restart-902

Configuring the Method and Reason in ServiceChange Commands for Virtual Interfaces

To configure the method and reason in ServiceChange commands for virtual interfaces:

  1. Access the configuration of the service change virtual interface indications properties.
    [edit services pgcp]user@host# edit gateway bgf-1 h248-options service-change virtual-interface-indications
  2. Specify the method and reason that the virtual BGF includes in Service-Interruption ServiceChange commands that it sends to the gateway controller when a virtual interface changes to Out-of-Service because of an administrative operation.
    [edit services pgcp gateway bgf-1 h248-options service-change virtual-interface-indications]user@host# set virtual-interface-down administrative forced-906
  3. Specify the method and reason that the virtual BGF includes in Notification ServiceChange commands that it sends to the gateway controller when a virtual interface transitions between the Forwarding and Draining states.
    [edit services pgcp gateway bgf-1 h248-options service-change virtual-interface-indications]user@host# set virtual-interface-down graceful none
  4. Specify the method and reason that the virtual BGF includes in Notification ServiceChange commands that it sends to the gateway controller when the virtual interface transitions from the Draining state to the Forwarding state.
    [edit services pgcp gateway bgf-1 h248-options service-change virtual-interface-indications]user@host# set virtual-interface-up cancel-graceful restart-918
  5. Specify the method and reason that the virtual BGF includes in Service-Restoration ServiceChange commands that it sends to the gateway controller when a virtual interface transitions to In-Service.
    [edit services pgcp gateway bgf-1 h248-options service-change virtual-interface-indications]user@host# set virtual-interface-up warm restart-900

Configuring the Method and Reason in ServiceChange Commands for Contexts

To configure the method and reason in ServiceChange commands for contexts:

  1. Access the configuration of the service change context indications properties.
    [edit services pgcp]user@host# edit gateway bgf-1 h248-options service-change context-indications
  2. Specify the method and reason that the virtual BGF includes in Service-Interruption ServiceChange commands that it sends to the gateway controller after a state loss on a specific context.
    [edit services pgcp gateway bgf-1 h248-options service-change context-indications]user@host# set state-loss forced-915

Published: 2010-04-13