Technical Documentation

Configuring the Method and Reason in ServiceChange Commands for Virtual Interfaces

To configure the method and reason in ServiceChange commands for virtual interfaces:

  1. Access the configuration of the service change virtual interface indications properties.
    [edit services pgcp]user@host# edit gateway bgf-1 h248-options service-change virtual-interface-indications
  2. Specify the method and reason that the virtual BGF includes in Service-Interruption ServiceChange commands that it sends to the gateway controller when a virtual interface changes to Out-of-Service because of an administrative operation.
    [edit services pgcp gateway bgf-1 h248-options service-change virtual-interface-indications]user@host# set virtual-interface-down administrative forced-906
  3. Specify the method and reason that the virtual BGF includes in Notification ServiceChange commands that it sends to the gateway controller when a virtual interface transitions between the Forwarding and Draining states.
    [edit services pgcp gateway bgf-1 h248-options service-change virtual-interface-indications]user@host# set virtual-interface-down graceful none
  4. Specify the method and reason that the virtual BGF includes in Notification ServiceChange commands that it sends to the gateway controller when the virtual interface transitions from the Draining state to the Forwarding state.
    [edit services pgcp gateway bgf-1 h248-options service-change virtual-interface-indications]user@host# set virtual-interface-up cancel-graceful restart-918
  5. Specify the method and reason that the virtual BGF includes in Service-Restoration ServiceChange commands that it sends to the gateway controller when a virtual interface transitions to In-Service.
    [edit services pgcp gateway bgf-1 h248-options service-change virtual-interface-indications]user@host# set virtual-interface-up warm restart-900

Published: 2010-04-13