[an error occurred while processing this directive][an error occurred while processing this directive]

Configuring the Control Services PIC or DPC for the Virtual BGF

To run the virtual BGF on a MultiServices PIC or MS-DPC, configure the service interface that you want to run the pgcpd process:

  1. Enter edit mode for the interface.
    [edit]user@host# edit interfaces ms-0/3/0
  2. Configure a description for the interface.
    [edit interfaces ms-0/3/0]user@host# set description BGF-Service-PIC
  3. Configure logical unit 0, and specify the protocol family and the address of a virtual BGF.
    [edit interfaces ms-0/3/0]user@host# set unit 0 family inet address 10.10.200.21/32
  4. Configure a logical unit and specify the protocol family.
    [edit interfaces ms-0/3/0]user@host# set unit 10 family inet
  5. Configure a logical unit and specify the protocol family.
    [edit interfaces ms-0/3/0]user@host# set unit 20 family inet

Published: 2010-04-13

[an error occurred while processing this directive]