[an error occurred while processing this directive][an error occurred while processing this directive]

ATM2 IQ Physical and Logical Configuration Statement Hierarchies

To configure ATM2 IQ physical interface properties, include the atm-options and sonet-options statements at the [edit interfaces at-fpc/pic/port] hierarchy level:

ATM2 IQ Physical Configuration Hierarchy

[edit interfaces at-fpc/pic/port]atm-options {cell-bundle-size cells;ilmi;linear-red-profiles profile-name{high-plp-max-threshold percent;low-plp-max-threshold percent;queue-depth cells high-plp-threshold percent low-plp-threshold percent;}mpls {pop-all-labels {required-depth number;}}pic-type atm2;plp-to-clp;promiscuous-mode {vpi vpi-identifier;}scheduler-maps map-name {forwarding-class class-name {epd-threshold cells plp1 cells;linear-red-profile profile-name;priority (high | low);transmit-weight (cells number | percent number);}vc-cos-mode (alternate | strict);}vpi vpi-identifier {oam-liveness {up-count;down-count;}oam-period (disable | seconds);shaping {(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);}}}sonet-options {aps {advertise-interval milliseconds;authentication-key key;force;hold-time milliseconds;lockout;neighbor address;paired-group group-name;protect-circuit group-name;request;revert-time seconds;working-circuit group-name;}bytes {e1-quiet value;f1 value;f2 value;s1 value;z3 value;z4 value;}loopback (local | remote);(payload-scrambler | no-payload-scrambler);rfc-2615;trigger {defect ignore {hold-time up milliseconds down milliseconds;}}(z0-increment | no-z0-increment);}

To configure ATM2 IQ logical interface properties, include the following statements:

ATM2 IQ Logical Configuration Hierarchy

allow-any-vci;atm-scheduler-map (map-name | default);cell-bundle-size cells;epd-threshold cells;multicast-vci vpi-identifier.vci-identifier;oam-liveness {up-count cells;down-count cells;}oam-period (disable | seconds);plp-to-clp;shaping {(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);}transmit-weight number;trunk-id number;vci vpi-identifier.vci-identifier;vpi vpi-identifier;family inet address address {multipoint-destination address;epd-threshold cells;inverse-arp;oam-liveness {up-count cells;down-count cells;}oam-period (disable | seconds);shaping {(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);}transmit-weight number;vci vpi-identifier.vci-identifier;}

You can include these statements at the following hierarchy levels:

  • [edit interfaces interface-name unit logical-unit-number]
  • [edit logical-systems logical-system-name interfaces interface-name unit logical-unit-number]

Published: 2010-04-20

[an error occurred while processing this directive]