[an error occurred while processing this directive][an error occurred while processing this directive]

[edit firewall] Hierarchy Level

The following CoS statements can be configured at the [edit firewall] hierarchy level. This is not a comprehensive list of statements available at the [edit firewall] hierarchy level. Only the statements documented in this manual are listed here. For more information about firewall configuration, see the JUNOS Policy Framework Configuration Guide.

[edit firewall]family family-name {filter filter-name {term term-name {from {match-conditions;}then {dscp 0;forwarding-class class-name;loss-priority (high | low);three-color-policer {(single-rate | two-rate) policer-name;}}}}simple-filter filter-name {term term-name {from {match-conditions;}then {forwarding-class class-name;loss-priority (high | low | medium);}}}}policer policer-name {logical-bandwidth-policer;if-exceeding {bandwidth-limit rate;bandwidth-percent number;burst-size-limit bytes;}then {policer-action;}}three-color-policer policer-name {action {loss-priority high then discard;}logical-interface-policer;single-rate {(color-aware | color-blind);committed-information-rate bps;committed-burst-size bytes;excess-burst-size bytes;}two-rate {(color-aware | color-blind);committed-information-rate bps;committed-burst-size bytes;peak-information-rate bps;peak-burst-size bytes;}}

Published: 2010-04-14

[an error occurred while processing this directive]