[an error occurred while processing this directive][an error occurred while processing this directive]

VoIP Interface Operational Mode Commands

Table 1 summarizes the command-line interface (CLI) commands that you can use to monitor and troubleshoot the Avaya TGM550 VoIP module on J2320, J2350, J4350, and J6350 Services Routers. You can also monitor the Telephony Interfaces Modules (TIMs) to a limited extent. Commands are listed in alphabetical order.

Table 1: VoIP Interface Operational Mode Commands

Task

Command

Remove the Media Gateway Controller (MGC) list configured on the TGM550 module.

clear tgm fpc

Provide a method for user authentication on the TGM550 modules.

request tgm login fpc

Configure the MGC list on the TGM550 module.

set tgm fpc

Display status information about TGM550 modules.

show interfaces (TGM550 Module)

Display dynamic call admission control (CAC) information.

show tgm dynamic-call-admission-control

Display information about TGM550 module connectivity and digital signal processor (DSP) capacity.

show tgm fpc

Display online and offline status of Avaya VoIP Telephony Interface Modules (TIMs).

show tgm telephony-interface-module status


Published: 2010-04-28

[an error occurred while processing this directive]