[an error occurred while processing this directive][an error occurred while processing this directive]

Protocol-Independent Routing Operational Mode Commands

Table 1 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot protocol-independent routing properties. Commands are listed in alphabetical order.

Note: The show route command has a lengthy set of options. Therefore, this chapter describes each option as a separate command. You can, however, combine several options and issue them as single show route command. For example, show route ccc exact.

The exceptions to this convention are the show as-path, show route damping, show route export, show route export-vrf-target, show route forwarding-table, show route instance, and show route martians commands, which cannot be used with any other options (other than level of output options, such as detail and extensive).

The show route flow validation command can only be used with the table option.

Table 1: Protocol-Independent Routing Operational Mode Commands

Task

Command

Display known autonomous system (AS) paths.

show as-path

Display AS path domain information.

show as-path domain

Display AS path summary information.

show as-path summary

Display information about the entries in the routing tables.

show route

Display routes that are currently active.

show route active-path

Display routes transmitted by a particular routing protocol.

show route advertising-protocol

Display all information about all routes.

show route all

Display routes containing a specified AS path.

show route aspath-regex

Display the best route to the specified address or range of addresses.

show route best

Display brief information about the entries in the routing table.

show route brief

Display circuit cross-connect (CCC) entries in the Multiprotocol Link Switching (MPLS) routing table.

show route ccc

Display routes containing members of a specified BGP community.

show route community

Display routes containing members of a specified BGP community based on a particular community name.

show route community-name

Display routes that have been damped.

show route damping

Display detailed information about the entries in the routing table.

show route detail

Display routes that exactly match the specified address or range of addresses.

show route exact

Display list of instances or routing tables that are importers or exporters of routes.

show route export

Display target communities for which autoexport is currently distributing routes.

show route export vrf-target

Display extensive information about the entries in the routing table.

show route extensive

Display the best route to an address.

show route flow validation

Display the JUNOS forwarding table.

show route forwarding-table

Display hidden routes only.

show route hidden

Display routes that are not preferred.

show route inactive-path

Display routes that are currently inactive.

show route inactive-prefix

Display routing instance information.

show route instance

Display routes corresponding to a specified label value.

show route label

Display routes that form a label-switched path.

show route label-switched-path

Display information about martian addresses.

show route martians

Display routes that contain the specified next hop.

show route next-hop

Display routes not associated with any BGP community.

show route no-community

Display routes exiting the router through the specified interface.

show route output

Display routes learned by the specified protocol.

show route protocol

Display routes in a range of destination prefixes.

show route range

Display routes received by a particular routing protocol.

show route receive-protocol

Display entries in the next-hop resolution database.

show route resolution

Display routes learned from snooping.

show route snooping

Display routes learned from the specified source.

show route source-gateway

Display statistics about the routes in all routing tables.

show route summary

Display routes in a particular routing table.

show route table

Display high-level summary of routing table information.

show route terse

Note: For information about how to configure protocol-independent features, see the JUNOS Routing Protocols Configuration Guide and the JUNOS Policy Framework Configuration Guide.


Published: 2010-04-28

[an error occurred while processing this directive]