Technical Documentation

MPLS Operational Mode Commands

Table 1 summarizes the command-line interface (CLI) commands you can use to monitor and troubleshoot Multiprotocol Label Switching (MPLS). Commands are listed in alphabetical order.

Table 1: MPLS Operational Mode Commands

Task

Command

Disconnect and restart dynamic LSPs that originate from this router.

clear mpls lsp

Manually trigger a bandwidth allocation adjustment for active LSP paths.

request mpls lsp adjust-autobandwidth

Display information about configured cross-connects.

show connections

Display peer and traffic engineering link information.

show link-management

Display peer link information.

show link-management peer

Display peer and traffic engineering link information (routing process).

show link-management routing

Display link management statistics.

show link-management statistics

Display traffic engineering link information.

show link-management te-link

Display MPLS administrative groups.

show mpls admin-groups

Display MPLS LSP call admission control (CAC) related information.

show mpls call-admission-control

Display CSPF statistics.

show mpls cspf

Display DiffServ traffic engineering classes.

show mpls diffserv-te

Display the status of interfaces on which MPLS is running.

show mpls interface

Display configured LSPs on this router, as well as all ingress, transit, and egress LSPs.

show mpls lsp

Display configured named paths that are used in dynamic MPLS.

show mpls path

Display configured static LSPs on this router, as well as all ingress, transit, and egress static LSPs.

show mpls static-lsp

Display entries in the traffic engineering database.

show ted database

Display current traffic engineering database links.

show ted link

Display protocols contributing to the traffic engineering database.

show ted protocol

Note: For more MPLS-related commands, such as show route ccc, show route protocol, show route instance, and show route table, see Protocol-Independent Routing Operational Mode Commands.

For information about how to configure MPLS, see the JUNOS MPLS Applications Configuration Guide.


Published: 2010-04-28