[an error occurred while processing this directive][an error occurred while processing this directive]

RADIUS Attributes for L2TP

The JUNOS Software supports the following types of RADIUS attributes for L2TP:

  • Juniper Networks vendor-specific attributes
  • Attribute-value pairs (AVPs) defined by the Internet Engineering Task Force (IETF)
  • RADIUS accounting stop and start AVPs

Juniper Networks vendor-specific RADIUS attributes are described in RFC 2865, Remote Authentication Dial In User Service (RADIUS). These attributes are encapsulated with the vendor ID set to the Juniper Networks ID number 2636. Table 1 lists the Juniper Networks vendor-specific attributes you can configure for L2TP.

Table 1: Juniper Networks Vendor-Specific RADIUS Attributes for L2TP

Attribute Name

Standard Number

Value

Juniper-Primary-DNS

31

IP address

Juniper-Primary-WINS

32

IP address

Juniper-Secondary-DNS

33

IP address

Juniper-Secondary-WINS

34

IP address

Juniper-Interface-ID

35

String

Juniper-IP-Pool-Name

36

String

Juniper-Keep-Alive

37

Integer

Table 2 lists the IETF RADIUS AVPs supported for LT2P.

Table 2: Supported IETF RADIUS Attributes for L2TP

Attribute Name

Standard Number

Value

User-Name

1

String

User-Password

2

String

CHAP-Password

3

String

NAS-IP-Address

4

IP address

NAS-Port

5

Integer

Service-Type

6

Integer

Framed-Protocol

7

Integer

Framed-IP-Address

8

IP address

Framed-IP-Netmask

9

IP address

Framed-MTU

12

Integer

Framed-Route

22

String

Session-Timeout

27

Integer

Idle-Timeout

28

Integer

Called-Station-ID

30

String

Calling-Station-ID

31

String

CHAP-Challenge

60

String

NAS-Port-Type

61

Integer

Framed-Pool

88

Integer

Table 3 lists the supported RADIUS accounting start AVPs for L2TP.

Table 3: Supported RADIUS Accounting Start Attributes for L2TP

Attribute Name

Standard Number

Value

User-Name

1

String

NAS-IP-Address

4

IP address

NAS-Port

5

Integer

Service-Type

6

Integer

Framed-Protocol

7

Integer

Framed-IP-Address

8

IP address

Called-Station-ID

30

String

Calling-Station-ID

31

String

Acct-Status-Type

40

Integer

Acct-Delay-Time

41

Integer

Acct-Session-ID

44

String

Acct-Authentic

45

Integer

NAS-Port-Type

61

Integer

Tunnel-Client-Endpoint

66

String

Tunnel-Server-Endpoint

67

String

Acct-Tunnel-Connection

68

String

Tunnel-Client-Auth-ID

90

String

Tunnel-Server-Auth-ID

91

String

Table 4 lists the supported RADIUS accounting stop AVPs for L2TP.

Table 4: Supported RADIUS Accounting Stop Attributes for L2TP

Attribute Name

Standard Number

Value

User-Name

1

String

NAS-IP-Address

4

IP address

NAS-Port

5

Integer

Service-Type

6

Integer

Framed-Protocol

7

Integer

Framed-IP-Address

8

IP address

Called-Station-ID

30

String

Calling-Station-ID

31

String

Acct-Status-Type

40

Integer

Acct-Delay-Time

41

Integer

Acct-Input-Octets

42

Integer

Acct-Output-Octets

43

Integer

Acct-Session-ID

44

String

Acct-Authentic

45

Integer

Acct-Session-Time

46

Integer

Acct-Input-Packets

47

Integer

Acct-Output-Packets

48

Integer

Acct-Terminate-Cause

49

Integer

Acct-Multi-Session-ID

50

String

Acct-Link-Count

51

Integer

NAS-Port-Type

61

Integer

Tunnel-Client-Endpoint

66

String

Tunnel-Server-Endpoint

67

String

Acct-Tunnel-Connection

68

String

Tunnel-Client-Auth-ID

90

String

Tunnel-Server-Auth-ID

91

String


Published: 2010-04-26

[an error occurred while processing this directive]