Technical Documentation


The jnxRedAlarms, whose object identifier is {jnxCraftAlarms 3}, contains the objects listed in Table 1.

Table 1: jnxRedAlarms


Object ID



jnxRedAlarms 1

Denotes the state of red alarms on the craft interface panel of the router chassis. This object contains one of the following values:

  • 1–other: The red alarm state is unknown.
  • 2–off: The red alarm is turned off.
  • 3–on: The red alarm is on. Typically, the red alarm is on when there is a system failure, power failure, or hardware malfunction, or when a threshold value is exceeded.


jnxRedAlarms 2

Shows the number of currently active and nonsilent red alarms.

Note: The value of this object is independent of the state of the Alarm Cutoff/Lamp Test button.


jnxRedAlarms 3

Shows the value of the sysUp time when the red alarm last changed from on to off or vice versa. This object contains 0 value, if the alarm state has not changed since the sysUp time was reset last time, or if the value is unknown.

Published: 2010-04-27