[an error occurred while processing this directive][an error occurred while processing this directive]

jnxCosAtmTrunkTable

The jnxCosAtmTrunkTable (object identifier is jnxAtmCos 4) contains statistics and configuration information related to the ATM trunk CoS interface.

The jnxCosAtmTrunkEntry (object identifier is jnxCosAtmTrunkTable 1) object uses ifIndex and jnxCosFcId, and contains the objects listed in Table 1.

Table 1: jnxCosAtmTrunkTable

Object

Object ID

Description

jnxCosAtmTrunkMode

jnxCosAtmTrunkEntry 1

Represents the mode of CoS queue priority for the trunk:

  • Strict mode (represented by integer value 0): One of the four queues has high priority, and is always serviced before the other three queues. The remaining queues are serviced in a round-robin fashion.
  • Alternate mode (represented by integer value 1): Even though one of the four queues has high priority, the servicing of the queues alternates between the high priority queue and the other queues.

jnxCosAtmTrunkScPriority

jnxCosAtmTrunkEntry 2

Represents the ATM scheduler priority for the queue associated with a particular forwarding class within the trunk.

jnxCosAtmTrunkScTxWeightType

jnxCosAtmTrunkEntry 3

Represents the ATM scheduler transmit weight type for the queue associated with a particular forwarding class inside the trunk. The weight type can be expressed either as the number of cells or as a percentage of the queue size.

jnxCosAtmTrunkScTxWeight

jnxCosAtmTrunkEntry 4

Represents the transmit weight for the queue. The transmit weight can be expressed either as the number of cells or as a percentage of the total trunk bandwidth. The unit is determined by the value set for jnxCosAtmTrunkScTxWeightType.

jnxCosAtmTrunkQaType

jnxCosAtmTrunkEntry 5

Represents the ATM queue admission type used for the specified trunk. Available values for this object are: red(1), singleEpd(2), and dualEpd(3)

jnxCosAtmTrunkEpdThresholdPlp0

jnxCosAtmTrunkEntry 6

Represents the threshold value beyond which all PLP0 cells get dropped. This object has a valid value only when the value for jnxCosAtmTrunkQaType is set to singleEpd or dualEpd.

jnxCosAtmTrunkEpdThresholdPlp1

jnxCosAtmTrunkEntry 7

Represents the threshold value beyond which all PLP1 cells get dropped. This object has a valid value only when the jnxCosAtmTrunkQaType object is set to dualEpd.

jnxCosAtmTrunkQstatsOutPackets

jnxCosAtmTrunkEntry 8

Represents the number of packets that belong to a particular forwarding class, and are transmitted on the specific trunk.

jnxCosAtmTrunkQstatsOutBytes

jnxCosAtmTrunkEntry 9

Represents the number of bytes that belong to a particular forwarding class, and are transmitted on the specific trunk.

jnxCosAtmTrunkQstatsOutDrops

jnxCosAtmTrunkEntry 10

Represents the number of outgoing packets on the trunk that are dropped.

jnxCosAtmTrunkQstatsOutLpBytes

jnxCosAtmTrunkEntry 11

Represents the number of low PLP (PLP0) bytes that are transmitted on the trunk.

jnxCosAtmTrunkQstatsOutLpPkt

jnxCosAtmTrunkEntry 12

Represents the number of low PLP (PLP0) packets that are transmitted on the trunk.

jnxCosAtmTrunkQstatsOutLpDropBytes

jnxCosAtmTrunkEntry 13

Represents the number of low PLP (PLP0) bytes dropped at the output queue.

jnxCosAtmTrunkQstatsOutHpDropBytes

jnxCosAtmTrunkEntry 14

Represents the number of high PLP (PLP1) bytes that are dropped at the output queue.

jnxCosAtmTrunkQstatsOutLpDropPkts

jnxCosAtmTrunkEntry 15

Represents the number of low PLP (PLP0) packets that are dropped at the output queue.

jnxCosAtmTrunkQstatsOutHpDropPkts

jnxCosAtmTrunkEntry 16

Represents the number of high PLP (PLP1) packets dropped at the output queue.

jnxCosAtmTrunkQstatsOutHpBytes

jnxCosAtmTrunkEntry 17

Represents the number of high PLP (PLP1) bytes that are transmitted on the trunk.

jnxCosAtmTrunkQstatsOutHpPkts

jnxCosAtmTrunkEntry 18

Represents the number of high PLP (PLP1) packets that are transmitted on the trunk.


Published: 2010-04-27

[an error occurred while processing this directive]