[an error occurred while processing this directive][an error occurred while processing this directive]

jnxAtmTrunkTable

The jnxAtmTrunkTable, whose object identifier is jnxAtm 4, contains information related to ATM trunks. Each JnxAtmTrunkEntry in jnxAtmTrunkTable contains the objects listed in Table 1.

Note: If the encapsulation type for the logical interface to which the trunk belongs is atmCccCellRelay, only the generic trunk information (jnxAtmTrunkConnType, jnxAtmTrunkEncapsulation, nxAtmTrunkFlags, and jnxAtmTrunkTotalDownTime) is valid.

Table 1: jnxAtmTrunkTable

Object

Object ID

Description

jnxAtmTrunkId

jnxAtmTrunkEntry 1

Represents the identifier of the ATM trunk.

jnxAtmTrunkConnType

jnxAtmTrunkEntry 2

Indicates the type of connection. This object uses the following integer values to denote the type of connection:

  • 1 other
  • 2 P2P

jnxAtmTrunkEncapsulation

jnxAtmTrunkEntry 3

Represents the ATM encapsulation type associated with the VC or trunk. This object uses the following integer values to denote the encapsulation type:

  • 1 other
  • 2 atmCccCellRelay

jnxAtmTrunkFlags

jnxAtmTrunkEntry 4

Represents the flags related to the trunk.

jnxAtmTrunkTotalDownTime

jnxAtmTrunkEntry 5

Indicates the total downtime (in seconds) for the trunk since the last reboot of the system.

jnxAtmTrunkInBytes

jnxAtmTrunkEntry 6

Indicates the number of bytes received on the trunk.

jnxAtmTrunkOutBytes

jnxAtmTrunkEntry 7

Indicates the number of bytes sent out on the trunk.

jnxAtmTrunkInPkts

jnxAtmTrunkEntry 8

Indicates the number of packets received on the trunk.

jnxAtmTrunkOutPkts

jnxAtmTrunkEntry 9

Indicates the number of packets sent out on the trunk.

jnxAtmTrunkTailQueuePktDrops

jnxAtmTrunkEntry 10

Represents the number of packets that were dropped because of bandwidth constraints. This object indicates that the packets were queued to be transmitted at a rate faster than allowed.

jnxAtmTrunkInOAMF4AISCells

jnxAtmTrunkEntry 15

Indicates the number of OAM F4 cells that are received with AIS (Alarm Indication Signal) bit set.

jnxAtmTrunkOutOAMF4AISCells

jnxAtmTrunkEntry 16

Indicates the number of OAM F4 cells that are sent out with AIS bit set.


Published: 2010-04-27

[an error occurred while processing this directive]