Port Group Table
 | Note:
jnxVlanPortGroupTable has been deprecated and
is replaced by jnxExVlanPortGroupTable. |
The jnxVlanPortGroupTable contains information about
port groupings. Each jnxVlanPortGroupEntry contains the objects
listed in Table 1.
Table 1: jnxVlanPortGroupTable
Object | Object ID | Description |
|---|
jnxVlanPortGroupIndex | jnxVlanPortGroupEntry 1 | Uniquely identifies a port group. |
jnxVlanPort | jnxVlanPortGroupEntry 2 | Specifies the port on the VLAN with which this port group
is associated. |
jnxVlanPortStatus | jnxVlanPortGroupEntry 3 | Shows the status of association between the port and
the VLAN. This object uses the following integer values: - 1–autoActive: The port is part
of the VLAN because the switch has automatically added the port.
- 2–allowed: The port has been configured
to be part of the VLAN, and is allowed to be part of the VLAN, if
the port meets all other requirements.
- 3–allowedActive: The port has
been configured to be part of the VLAN, and is allowed to be part
of the VLAN, if the port meets all other requirements. However, unlike
in the case of allowed ports, this port has a device that
is participating in the VLAN associated with the port.
- 4–allowedNotAvail: The port is
active on some other VLAN, and is not available currently. This value
applies to devices that do not allow a port to be part of more than
one VLANs at the same time.
- 5–notAssociated: The port is part
of a port group that is not associated with the VLAN.
|
jnxExVlanPortGroupTable
jnxExVlanPortGroupTable replaces the deprecated jnxVlanPortGroupTable and contains the objects listed in Table 2.
Table 2: jnxExVlanPortGroupTable
Object | Object ID | Description |
|---|
jnxExVlanPortGroupIndex | jnxExVlanPortGroupEntry 1 | Uniquely identifies a port group. |
jnxExVlanPort | jnxExVlanPortGroupEntry 2 | Specifies the port on the VLAN with which this port group is
associated. |
jnxExVlanPortStatus | jnxExVlanPortGroupEntry 3 | Shows the status of association between the port and the VLAN.
This object uses the following integer values: - 1–autoActive: The port is part
of the VLAN because the switch has automatically added the port.
- 2–allowed: The port has been configured
to be part of the VLAN, and is allowed to be part of the VLAN, if
the port meets all other requirements.
- 3–allowedActive: The port has
been configured to be part of the VLAN, and is allowed to be part
of the VLAN, if the port meets all other requirements. However, unlike
in the case of allowed ports, this port has a device that
is participating in the VLAN associated with the port.
- 4–allowedNotAvail: The port is
active on some other VLAN, and is not available currently. This value
applies to devices that do not allow a port to be part of more than
one VLANs at the same time.
- 5–notAssociated: The port is part
of a port group that is not associated with the VLAN.
Default value for this object is allowed. |
Published: 2010-04-27
