[an error occurred while processing this directive][an error occurred while processing this directive]

Logical Interfaces Configuration Statements

To configure logical interface properties, include the following statements:

unit logical-unit-number {accept-source-mac {mac-address mac-address {policer {input cos-policer-name;output cos-policer-name;}}}accounting-profile name;allow-any-vci;atm-scheduler-map (map-name | default);backup-options {interface interface-name;}bandwidth rate;cell-bundle-size cells;clear-dont-fragment-bit;compression {rtp {f-max-period number;queues [ queue-numbers ];port {minimum port-number;maximum port-number;}}}compression-device interface-name;copy-tos-to-outer-ip-header;demux-destination family;demux-source family;demux-options {underlying-interface interface-name;}description text;dial-options {l2tp-interface-id name;(dedicated | shared);}dialer-options {activation-delay seconds;callback;callback-wait-period time;deactivation-delay seconds;dial-string [ dial-string-numbers ];idle-timeout seconds;incoming-map {caller (caller-id| accept-all);initial-route-check seconds;load-interval seconds;load-threshold number;pool pool-name;redial-delay time;watch-list {[ routes ];}}}disable;disable-mlppp-inner-ppp-pfc;dlci dlci-identifier;drop-timeout milliseconds;dynamic-call-admission-control {activation-priority priority;bearer-bandwidth-limit kilobits-per-second;}encapsulation type;epd-threshold plp1 cells;filter filter-name;fragment-threshold bytes;inner-vlan-id-range start start-id end end-id;input-vlan-map {inner-tag-protocol-id;inner-vlan-id;(pop | pop-pop | pop-swap | push | push-push | swap |swap-push | swap-swap);tag-protocol-id tpid;vlan-id number;}interleave-fragments;inverse-arp;link-layer-overhead percent;layer2-policer {input-policer policer-name;input-three-color policer-name;output-policer policer-name;output-three-color policer-name;}minimum-links number;mrru bytes;multicast-dlci dlci-identifier;multicast-vci vpi-identifier.vci-identifier;multilink-max-classes number;multipoint;oam-liveness {up-count cells;down-count cells;}oam-period (seconds | disable);output-vlan-map {inner-tag-protocol-id;inner-vlan-id;(pop | pop-pop | pop-swap | push | push-push | swap |swap-push | swap-swap);tag-protocol-id tpid;vlan-id number;}passive-monitor-mode;peer-unit unit-number;plp-to-clp;point-to-point;ppp-options {chap {access-profile name;default-chap-secret name;local-name name;passive;}compression {acfc;pfc;}dynamic-profile profile-name;lcp-restart-timer milliseconds;loopback-clear-timer seconds;ncp-restart-timer milliseconds;pap {default-pap-password password;local-name name;local-password password;passive;}pppoe-options {access-concentrator name;auto-reconnect seconds;(client | server);service-name name;underlying-interface interface-name;}proxy-arp;service-domain (inside | outside);shaping {(cbr rate | rtvbr peak rate sustained rate burst length | vbr peak rate sustained rate burst length);queue-length number;}short-sequence;transmit-weight number;(traps | no-traps);trunk-bandwidth rate;trunk-id number;tunnel {backup-destination address;destination address;key number;routing-instance {destination routing-instance-name;}source source-address;ttl number;}vci vpi-identifier.vci-identifier;vci-range start start-vci end end-vci;vpi vpi-identifier;vlan-id number;vlan-id-range number-number;vlan-tags inner tpid.vlan-id outer tpid.vlan-id;family family {[ family-statements ];}}

You can include these statements at the following hierarchy levels:

  • [edit interfaces interface-name]
  • [edit logical-systems logical-system-name interfaces interface-name]

For information about interface-specific logical properties, see Statements for Logical Interface Properties.


Published: 2010-04-20

[an error occurred while processing this directive]